Epson M1129 Waste Ink Counter Reset
If your Epson M1129 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson M1129 uses a software counter to estimate pad saturation and locks printing at a set threshold.
Why Does the Epson M1129 Show ‘Service Required’?
Návšteva servisu je často zbytočná. Wic Reset Connect allows a safe Epson M1129 waste counter reset in minutes.
Step-by-Step: Epson M1129 Waste Counter Reset
- Krok 1: Use a Windows PC (7–11) with Internet access. Connect Epson M1129 via USB (Wi-Fi reset is not supported).
- Krok 2: Otvorte stránku Wic Reset Connect with admin privileges and verify device recognition for Epson M1129.
- Krok 3: Zadajte svoj resetovací kľúč a stlačte Obnovenie. Wait ~1–2 minutes, then restart Epson M1129.
Most Epson M1129 waste counter resets finish in ~1–2 minutes.
Predtým, ako začnete
- Stabilné internetové pripojenie počas resetovania
- Vyžaduje sa pripojenie USB (resetovanie Wi-Fi nie je podporované)
- Platný kľúč na resetovanie Wic Connect
- Windows 7/8/10/11 PC
Ak tlačiareň nie je rozpoznaná
- Zatvorte Epson Status Monitor alebo iné nástroje tlačiarne.
- Používajte priame pripojenie USB (vyhnite sa rozbočovačom).
- Reštartujte tlačiareň a počítač a potom to skúste znova.
- Spustite aplikáciu ako správca.
- Dočasne vypnite VPN/proxy server, ak overenie zlyhá.
Často kladené otázky
Môžem resetovať cez Wi-Fi?
Nie. Resetovanie vyžaduje pripojenie USB k počítaču so systémom Windows.
Potrebujem servisné stredisko?
Zvyčajne nie pre zámok počítadla odpadového atramentu; zvyčajne stačí reset.
Ako dlho to trvá?
Zvyčajne približne 1-2 minúty.
Čo ak resetovanie nefunguje?
Skontrolujte kábel/port USB, spustite ho ako správca a zatvorte ostatné nástroje tlačiarne.
Guide prepared for Epson M1129 – Waste Ink Counter Reset using Wic Reset Connect.