Model-specific reset guide
Epson EP-901F Reset Waste Ink Counter
A waste ink counter warning can prevent Epson EP-901F from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why the ink pad counter blocks Epson EP-901F
Waste ink produced by cleaning cycles is collected inside the printer. Epson EP-901F tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson EP-901F. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson EP-901F
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for EP-901F and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson EP-901F to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson EP-901F.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson EP-901F is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for EP-901F; a generic Windows driver may not expose the required communication interface.
Epson EP-901F reset FAQ
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Can I reset Epson EP-901F over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson EP-901F
Follow the verified sequence for Epson EP-901F, then restart the printer and continue your work.