Fix Epson EP-901F Service Required – Waste Counter Reset

Epson EP-901F Waste Ink Counter Reset

The Epson EP-901F is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson EP-901F tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why Does the Epson EP-901F Show ‘Service Required’?

Most Epson EP-901F waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

Printer refuses to print even with ink available
Epson Status Monitor shows maintenance warning
Blinking lights and blocked jobs
Device is locked until reset is performed

Step-by-Step: Epson EP-901F Waste Counter Reset

Step 1: Prepare a Windows PC + USB cable and connect Epson EP-901F directly. Keep Internet enabled for validation.
Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson EP-901F appears in the device list.
Step 3: Paste the reset key, click Reset, and after completion power-cycle Epson EP-901F.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson EP-901F waste counter resets finish in ~1–2 minutes.

FAQ

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

How long does it take?

Usually about 1–2 minutes.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Guide prepared for Epson EP-901F – Waste Ink Counter Reset using Wic Reset Connect.