Model-specific reset guide
Canon TS8252 Ink Absorber Full Reset
An absorber warning on Canon TS8252 does not necessarily mean that the printer is mechanically damaged. The software counter and the physical pads must be considered separately.
The waste ink counter inside Canon TS8252
The absorber pads collect ink generated during print-head cleaning. Canon TS8252 tracks those maintenance cycles in memory rather than measuring the pads directly.
Wic Reset Connect is designed to reset the compatible counter in Canon TS8252. The physical waste ink system should still be inspected and maintained when necessary.
How to enter service mode on Canon TS8252
- Turn the printer off.
- Stlačte a podržte tlačidlo Zastavenie/resetovanie.
- Počas držania tlačidla Stop/Reset stlačte a podržte Napájanie.
- Release Stop/Reset but keep holding Power.
- Press and release Stop/Reset 5-krát.
- Wait briefly, then release Power. The power indicator should remain steadily lit.
Reset the counter in Canon TS8252
Service mode must be entered correctly before Wic Reset Connect can communicate with the maintenance interface. Resolve other printer errors first.
-
Prepare the printer
Resolve other errors, confirm a steady power light and enter service mode using the sequence above.
-
Connect directly by USB
Connect Canon TS8252 to a Windows 7, 8, 10 or 11 computer without Wi-Fi or a USB hub.
-
Start Wic Reset Connect
Run the program as Administrator and wait until the Canon service-mode device is detected.
-
Enter the key and reset
Enter the purchased key, select Reset and keep the printer connected until confirmation appears.
If Canon TS8252 is not detected
- Run Wic Reset Connect as Administrator and keep internet access active for key validation.
- Repeat the button sequence at a steady pace; releasing Power too early is a common reason service mode fails.
- Connect Canon TS8252 directly to the computer and try another data-capable USB cable or port.
- Close Canon maintenance utilities and clear paused print jobs before opening Wic Reset Connect.
Canon TS8252 reset FAQ
Koľkokrát mám stlačiť tlačidlo Stop/Reset?
For Canon TS8252, use 5 Stop/Reset presses in the sequence shown on this page.
What if my reset key was used during a failed attempt?
Correct the cause first, then use the new-key generator or contact support for assistance.
Does Canon TS8252 require service mode?
Yes. The printer must expose its maintenance interface before the counter can be reset with Wic Reset Connect.
Restore Canon TS8252
Ready to reset Canon TS8252? Verify the power light, USB connection and service-mode state before continuing.