Reset Epson XP-216 Waste Ink Counter in Minutes

Epson XP-216 Waste Ink Counter Reset

When the Epson XP-216 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson XP-216 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson XP-216 Stops Printing (Waste Counter Limit)

Most Epson XP-216 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

How the Error Appears

  • Printer refuses to print even with ink available
  • Epson Status Monitor shows maintenance warning
  • Blinking lights and blocked jobs
  • Device is locked until reset is performed

Epson XP-216 Ink Pad Counter Reset – Quick Steps

  1. Passo 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-216 via USB (Wi-Fi reset is not supported).
  2. Passo 2: Run Wic Reset Connect as Administrator and confirm Epson XP-216 is detected.
  3. Etapa 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson XP-216.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson XP-216 waste counter resets finish in ~1–2 minutes.

Troubleshooting

  • Use a direct USB connection (avoid hubs).
  • Temporarily disable VPN/proxy if validation fails.
  • Restart printer and PC, then try again.
  • Run the app as Administrator.
  • Try another USB cable (some cables are charge-only).

FAQ

Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
How long does it take?
Usually about 1–2 minutes.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson XP-216 – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras