Epson XP-216 Waste Ink Counter Reset

When the Epson XP-216 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson XP-216 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson XP-216 Stops Printing (Waste Counter Limit)

Most Epson XP-216 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Kako se pogreška prikazuje

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Epson XP-216 Ink Pad Counter Reset – Quick Steps

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-216 via USB (Wi-Fi reset is not supported).
2. Korak 2: Trči Wic Reset Connect as Administrator and confirm Epson XP-216 is detected.
3. Korak 3: Unesite svoj ključ za resetiranje i pritisnite Ponovno pokretanje. Wait ~1–2 minutes, then restart Epson XP-216.

Most Epson XP-216 waste counter resets finish in ~1–2 minutes.

Otklanjanje poteškoća

• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Pokrenite aplikaciju kao administrator.
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).

Često postavljana pitanja