Model-specific reset guide
Epson SX445W Reset Waste Ink Counter
If your Epson SX445W has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
Before resetting Epson SX445W
Epson SX445W uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson SX445W. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson SX445W
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for SX445W and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson SX445W to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson SX445W.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson SX445W is not detected
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Install the original Epson driver for SX445W; a generic Windows driver may not expose the required communication interface.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson SX445W reset FAQ
Does Epson SX445W need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Can I reset Epson SX445W over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson SX445W
Follow the verified sequence for Epson SX445W, then restart the printer and continue your work.