Epson SX445W Waste Ink Counter Reset

The Epson SX445W delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson SX445W uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson SX445W Stops Printing (Waste Counter Limit)

通常不需要上门服务。. Wic Reset Connect allows a safe Epson SX445W waste counter reset in minutes.

错误如何出现

• ‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
• 维护/支持代码（因型号/驱动程序而异）
• 清洁循环后停止打印
• 重新启动打印机后，警告重复出现

Epson SX445W Ink Pad Counter Reset – Quick Steps

1. 步骤 1： Use a Windows PC (7–11) with Internet access. Connect Epson SX445W via USB (Wi-Fi reset is not supported).
2. 步骤 2： 运行 Wic Reset Connect as Administrator and confirm Epson SX445W is detected.
3. 步骤 3： 粘贴重置密钥，点击 重置, and after completion power-cycle Epson SX445W.

Most Epson SX445W waste counter resets finish in ~1–2 minutes.

系统要求

• 重置期间稳定的互联网连接
• 需要 USB 连接（不支持 Wi-Fi 重置）
• Windows 7/8/10/11 电脑
• 有效 Wic 复位连接复位键

故障排除

• 以管理员身份运行应用程序。.
• 试试另一条 USB 电缆（有些电缆只能充电）。.
• 关闭 Epson 状态监视器或其他打印机实用程序。.
• 重新启动打印机和电脑，然后再试一次。.
• 如果验证失败，则暂时禁用 VPN/代理。.

常见问题