Model-specific reset guide
Epson PX-435A: Reinicialização do contador de tinta residual
Epson PX-435A may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Before resetting Epson PX-435A
Epson PX-435A uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson PX-435A. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson PX-435A
Use the sequence below to establish a stable USB connection and clear the waste ink counter.
-
Install the original driver
Install the official Epson driver for PX-435A and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson PX-435A to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson PX-435A.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson PX-435A is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Install the original Epson driver for PX-435A; a generic Windows driver may not expose the required communication interface.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson PX-435A reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Can I reset Epson PX-435A over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson PX-435A
A direct USB connection, the correct driver and a valid key are all you need to reset Epson PX-435A.