Epson CX3905 Waste Ink Counter Reset

Epson CX3905 Waste Ink Counter Reset

The Epson CX3905 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

A waste ink counter in the Epson CX3905 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

What Causes the Epson CX3905 Ink Pad Counter Warning?

With Wic Reset Connect, you can reset the Epson CX3905 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Common Symptoms

  • ‘Service Required’ / service life message in driver or utility
  • Maintenance/support code (varies by model/driver)
  • Printing stops after cleaning cycles
  • Warning repeats after restarting the printer

Epson CX3905 Ink Pad Counter Reset – Quick Steps

  1. Passo 1: Connect Epson CX3905 to a Windows computer with a stable Internet connection using a USB cable.
  2. Passo 2: Run Wic Reset Connect as Administrator and confirm Epson CX3905 is detected.
  3. Etapa 3: Use the key to reset the counter, wait for completion, then restart Epson CX3905 to finalize.
Buy Reset Key ⬇️ Download Wic Reset Connect Instruções

Most Epson CX3905 waste counter resets finish in ~1–2 minutes.

If the Printer Is Not Detected

  • Run the app as Administrator.
  • Temporarily disable VPN/proxy if validation fails.
  • Try another USB cable (some cables are charge-only).
  • Close Epson Status Monitor or other printer utilities.
  • Use a direct USB connection (avoid hubs).

FAQ

How long does it take?
Usually about 1–2 minutes.
Can I reset over Wi-Fi?
No. The reset requires a USB connection to a Windows PC.
Do I need a service center?
Typically not for a waste ink counter lock; a reset is usually sufficient.
What if reset doesn’t work?
Check USB cable/port, run as admin, and close other printer utilities.

Guide prepared for Epson CX3905 – Waste Ink Counter Reset using Wic Reset Connect.

Carrinho de compras