Vodnik za ponastavitev za določen model
Epson CX3905 Reset Waste Ink Counter
Epson CX3905 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Before resetting Epson CX3905
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson CX3905 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect je zasnovan za ponastavitev združljivega števca v Epson CX3905. Fizični sistem za odpadno črnilo je treba po potrebi še vedno pregledati in vzdrževati.
Reset the counter in Epson CX3905
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Namestite izvirni gonilnik
Install the official Epson driver for CX3905 and confirm that Windows can see the printer.
-
Povežite neposredno prek USB-ja
Connect Epson CX3905 to the computer without Wi-Fi, a hub or an adapter.
-
Zaženite Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson CX3905.
-
Vnesite ključ in ponastavite
Vnesite kupljeni ključ, izberite Ponastavi in pustite tiskalnik povezan do zaključka.
If Epson CX3905 is not detected
- Zaženite Wic Reset Connect kot skrbnik in med celotnim preverjanjem ohranite aktivno internetno povezavo.
- Če tiskalnik ni zaznan, poskusite z drugimi vrati USB in znanim podatkovnim kablom USB.
- Počistite zaustavljena tiskalna opravila in znova zaženite tiskalnik ter Windows, če drug program zaseda povezavo USB.
- Install the original Epson driver for CX3905; a generic Windows driver may not expose the required communication interface.
Epson CX3905 reset FAQ
Does Epson CX3905 need service mode?
Ne. Tiskalniki Epson ne uporabljajo zaporedja servisnega načina Canon. Tiskalnik običajno povežite prek USB-ja.
Kako dolgo traja ponastavitev?
Sama ponastavitev se običajno konča v približno 1–2 minutah, ko je tiskalnik pravilno zaznan.
Kaj storiti, če prvi poskus ponastavitve ne uspe?
Najprej odpravite težavo z gonilnikom ali komunikacijo USB. Če je bil ključ porabljen, uporabite generator novega ključa ali se obrnite na podporo.
Restore Epson CX3905
A direct USB connection, the correct driver and a valid key are all you need to reset Epson CX3905.