Model-specific reset guide
Epson XP-621 Reset Waste Ink Counter
Epson XP-621 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Why Epson XP-621 stops printing
Epson XP-621 uses stored counter data to estimate absorber usage. The estimate may reach its limit before the pads appear completely saturated, but physical maintenance should still be considered.
Wic Reset Connect is designed to reset the compatible counter in Epson XP-621. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson XP-621
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Install the original driver
Install the official Epson driver for XP-621 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson XP-621 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson XP-621.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson XP-621 is not detected
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
Epson XP-621 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson XP-621 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson XP-621
A direct USB connection, the correct driver and a valid key are all you need to reset Epson XP-621.