Model-specific reset guide
Epson WF-2650 – zresetowanie licznika zużytego atramentu
When Epson WF-2650 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.
Why Epson WF-2650 stops printing
Every cleaning cycle sends a small amount of ink to the waste ink system. Epson WF-2650 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson WF-2650. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson WF-2650
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for WF-2650 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson WF-2650 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WF-2650.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson WF-2650 is not detected
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Install the original Epson driver for WF-2650; a generic Windows driver may not expose the required communication interface.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
Epson WF-2650 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Can I reset Epson WF-2650 over Wi-Fi?
No. Wic Reset Connect requires a direct USB connection to the Windows computer.
Restore Epson WF-2650
Use the model-specific steps above to reset Epson WF-2650 with a stable connection and a valid key.