Epson WF-2650 Waste Ink Counter Reset

The Epson WF-2650 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-2650 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson WF-2650 Show ‘Service Required’?

S Wic Reset Connect, you can reset the Epson WF-2650 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Kako se pogreška prikazuje

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Three Steps to Restore Epson WF-2650 Printing

1. Korak 1: Connect Epson WF-2650 to a Windows computer with a stable Internet connection using a USB cable.
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson WF-2650 appears in the device list.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson WF-2650.

Most Epson WF-2650 waste counter resets finish in ~1–2 minutes.

Sistemski zahtjevi

• Stabilna internetska veza tijekom resetiranja
• Windows 7/8/10/11 PC
• Valjani Wic resetni ključ za povezivanje
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)

Otklanjanje poteškoća

• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Pokrenite aplikaciju kao administrator.

Često postavljana pitanja