Epson M1108 Waste Ink Counter Reset

If your Epson M1108 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson M1108 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson M1108 Show ‘Service Required’?

Most Epson M1108 waste ink counter locks are solved by a software counter reset. Wic Reset Connect biedt een eenvoudige procedure.

Veel voorkomende symptomen

• ‘Bericht ’Service vereist' / levensduur van service in stuurprogramma of hulpprogramma
• Onderhouds-/supportcode (verschilt per model/driver)
• Afdrukken stopt na reinigingscycli
• Waarschuwing wordt herhaald na opnieuw opstarten van de printer

Three Steps to Restore Epson M1108 Printing

1. Stap 1: Prepare a Windows PC + USB cable and connect Epson M1108 directly. Keep Internet enabled for validation.
2. Stap 2: Start Wic Reset Connect in Administrator mode and wait until Epson M1108 appears in the device list.
3. Stap 3: Plak de resettoets, klik op Reset, and after completion power-cycle Epson M1108.

Most Epson M1108 waste counter resets finish in ~1–2 minutes.

Systeemvereisten

• Stabiele internetverbinding tijdens het resetten
• USB-verbinding vereist (Wi-Fi-reset niet ondersteund)
• Geldige Wic Reset Verbind Resetsleutel
• Windows 7/8/10/11 PC

Veelgestelde vragen