Epson M1108 Waste Ink Counter Reset

If your Epson M1108 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson M1108 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson M1108 Show ‘Service Required’?

Most Epson M1108 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Uobičajeni simptomi

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Three Steps to Restore Epson M1108 Printing

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson M1108 directly. Keep Internet enabled for validation.
2. Korak 2: Počni Wic Reset Connect in Administrator mode and wait until Epson M1108 appears in the device list.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson M1108.

Most Epson M1108 waste counter resets finish in ~1–2 minutes.

Sistemski zahtjevi

• Stabilna internetska veza tijekom resetiranja
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
• Valjani Wic resetni ključ za povezivanje
• Windows 7/8/10/11 PC

Često postavljana pitanja