Fix Epson M1108 Service Required – Waste Counter Reset

Epson M1108 Waste Ink Counter Reset

If your Epson M1108 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson M1108 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson M1108 Show ‘Service Required’?

Most Epson M1108 waste ink counter locks are solved by a software counter reset. Wic Reset Connect 提供了一个简单明了的程序。.

常见症状

‘驱动程序或实用程序中的 ’需要服务"/使用寿命信息
维护/支持代码（因型号/驱动程序而异）
清洁循环后停止打印
重新启动打印机后，警告重复出现

Three Steps to Restore Epson M1108 Printing

步骤 1： Prepare a Windows PC + USB cable and connect Epson M1108 directly. Keep Internet enabled for validation.
步骤 2： 开始 Wic Reset Connect in Administrator mode and wait until Epson M1108 appears in the device list.
步骤 3： 粘贴重置密钥，点击重置, and after completion power-cycle Epson M1108.

购买重置密钥 ⬇️ 下载 Wic 重置连接说明

Most Epson M1108 waste counter resets finish in ~1–2 minutes.

系统要求

重置期间稳定的互联网连接
需要 USB 连接（不支持 Wi-Fi 重置）
有效 Wic 复位连接复位键
Windows 7/8/10/11 电脑

常见问题

我需要服务中心吗？

通常不用于废墨计数器锁；重置通常就足够了。.

需要多长时间？

通常约 1-2 分钟。.

如果重置不起作用怎么办？

检查 USB 电缆/端口，以管理员身份运行，并关闭其他打印机实用程序。.

可以通过 Wi-Fi 重置吗？

重置需要通过 USB 连接到 Windows PC。.

Guide prepared for Epson M1108 – Waste Ink Counter Reset using Wic Reset Connect.