Epson ET-2650 Waste Ink Counter Reset
When the Epson ET-2650 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
A waste ink counter in the Epson ET-2650 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
Understanding the Epson ET-2650 Waste Ink Counter
Most Epson ET-2650 waste ink counter locks are solved by a software counter reset. Wic Reset Connect biedt een eenvoudige procedure.
Hoe de fout optreedt
- ‘Bericht ’Service vereist' / levensduur van service in stuurprogramma of hulpprogramma
- Onderhouds-/supportcode (verschilt per model/driver)
- Afdrukken stopt na reinigingscycli
- Waarschuwing wordt herhaald na opnieuw opstarten van de printer
Reset Epson ET-2650 Waste Ink Counter in 3 Steps
- Stap 1: Connect Epson ET-2650 to a Windows computer with a stable Internet connection using a USB cable.
- Stap 2: Start Wic Reset Connect in Administrator mode and wait until Epson ET-2650 appears in the device list.
- Stap 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2650 to finalize.
Most Epson ET-2650 waste counter resets finish in ~1–2 minutes.
Systeemvereisten
- Windows 7/8/10/11 PC
- Geldige Wic Reset Verbind Resetsleutel
- USB-verbinding vereist (Wi-Fi-reset niet ondersteund)
- Stabiele internetverbinding tijdens het resetten
Als de printer niet wordt gedetecteerd
- Sluit Epson Status Monitor of andere hulpprogramma's voor printers.
- Gebruik een directe USB-verbinding (vermijd hubs).
- VPN/proxy tijdelijk uitschakelen als validatie mislukt.
- Probeer een andere USB-kabel (sommige kabels zijn alleen oplaadbaar).
- Start de printer en pc opnieuw op en probeer het opnieuw.
Guide prepared for Epson ET-2650 – Waste Ink Counter Reset using Wic Reset Connect.