Epson ET-2650 Waste Ink Counter Reset
When the Epson ET-2650 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
A waste ink counter in the Epson ET-2650 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.
Understanding the Epson ET-2650 Waste Ink Counter
Most Epson ET-2650 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.
Bagaimana Kesalahan Muncul
- ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
- Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
- Pencetakan berhenti setelah siklus pembersihan
- Peringatan berulang setelah printer dihidupkan ulang
Reset Epson ET-2650 Waste Ink Counter in 3 Steps
- Langkah 1: Connect Epson ET-2650 to a Windows computer with a stable Internet connection using a USB cable.
- Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson ET-2650 appears in the device list.
- Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson ET-2650 to finalize.
Most Epson ET-2650 waste counter resets finish in ~1–2 minutes.
Persyaratan Sistem
- Windows 7/8/10/11 PC
- Tombol reset Wic Reset yang valid Hubungkan tombol reset
- Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
- Koneksi Internet stabil selama pengaturan ulang
Jika Printer Tidak Terdeteksi
- Tutup Epson Status Monitor atau utilitas printer lainnya.
- Gunakan koneksi USB langsung (hindari hub).
- Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.
- Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
- Hidupkan ulang printer dan PC, kemudian coba lagi.
Guide prepared for Epson ET-2650 – Waste Ink Counter Reset using Wic Reset Connect.