Model-specific reset guide
Epson ET-2610: de teller voor afvalinkt resetten
A waste ink counter warning can prevent Epson ET-2610 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why the ink pad counter blocks Epson ET-2610
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson ET-2610 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect is designed to reset the compatible counter in Epson ET-2610. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ET-2610
Start with the connection checks below, then run the reset without opening other printer programs during the process.
-
Install the original driver
Install the official Epson driver for ET-2610 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ET-2610 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-2610.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ET-2610 is not detected
- Install the original Epson driver for ET-2610; a generic Windows driver may not expose the required communication interface.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson ET-2610 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Restore Epson ET-2610
Use the model-specific steps above to reset Epson ET-2610 with a stable connection and a valid key.