Epson XP-630 Waste Ink Counter Reset

When the Epson XP-630 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-630 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-630 Stops Printing (Waste Counter Limit)

Con Wic Reset Connect, you can reset the Epson XP-630 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Segni tipici

• ‘Messaggio ’Service Required' / service life nel driver o nell'utility
• Codice di manutenzione/assistenza (varia a seconda del modello/driver)
• La stampa si interrompe dopo i cicli di pulizia
• L'avviso si ripete dopo il riavvio della stampante

Reset Epson XP-630 Waste Ink Counter in 3 Steps

1. Fase 1: Prepare a Windows PC + USB cable and connect Epson XP-630 directly. Keep Internet enabled for validation.
2. Fase 2: Inizio Wic Reset Connect in Administrator mode and wait until Epson XP-630 appears in the device list.
3. Fase 3: Incollare la chiave di ripristino, fare clic su Reset, and after completion power-cycle Epson XP-630.

Most Epson XP-630 waste counter resets finish in ~1–2 minutes.

Requisiti di sistema

• PC Windows 7/8/10/11
• Connessione Internet stabile durante il reset
• È necessaria la connessione USB (il reset Wi-Fi non è supportato)
• Wic Reset valido Chiave di reset Connect

Domande frequenti