Epson XP-630 Waste Ink Counter Reset

When the Epson XP-630 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-630 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-630 Stops Printing (Waste Counter Limit)

Dengan Wic Reset Connect, you can reset the Epson XP-630 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Tanda-tanda Khas

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Reset Epson XP-630 Waste Ink Counter in 3 Steps

1. Langkah 1: Prepare a Windows PC + USB cable and connect Epson XP-630 directly. Keep Internet enabled for validation.
2. Langkah 2: Mulai Wic Reset Connect in Administrator mode and wait until Epson XP-630 appears in the device list.
3. Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson XP-630.

Most Epson XP-630 waste counter resets finish in ~1–2 minutes.

Persyaratan Sistem

• Windows 7/8/10/11 PC
• Koneksi Internet stabil selama pengaturan ulang
• Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
• Tombol reset Wic Reset yang valid Hubungkan tombol reset

Pertanyaan yang Sering Diajukan