Epson RX690 Waste Ink Counter Reset

When the Epson RX690 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

The Epson RX690 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson RX690 Waste Ink Counter

Most Epson RX690 waste ink counter locks are solved by a software counter reset. Wic Reset Connect fornisce una procedura semplice.

Come appare l'errore

• ‘Messaggio ’Service Required' / service life nel driver o nell'utility
• Codice di manutenzione/assistenza (varia a seconda del modello/driver)
• La stampa si interrompe dopo i cicli di pulizia
• L'avviso si ripete dopo il riavvio della stampante

Step-by-Step: Epson RX690 Waste Counter Reset

1. Fase 1: Use a Windows PC (7–11) with Internet access. Connect Epson RX690 via USB (Wi-Fi reset is not supported).
2. Fase 2: Correre Wic Reset Connect as Administrator and confirm Epson RX690 is detected.
3. Fase 3: Inserire il tasto di reset e premere Reset. Wait ~1–2 minutes, then restart Epson RX690.

Most Epson RX690 waste counter resets finish in ~1–2 minutes.

Requisiti di sistema

• Connessione Internet stabile durante il reset
• È necessaria la connessione USB (il reset Wi-Fi non è supportato)
• Wic Reset valido Chiave di reset Connect
• PC Windows 7/8/10/11

FAQ