Model-specific reset guide
إعادة ضبط عداد الحبر المهدر في طابعة Epson RX690
Epson RX690 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.
Why the ink pad counter blocks Epson RX690
The printer protects against possible ink overflow by monitoring an internal service counter. On Epson RX690, reaching the threshold can trigger an ink pad warning and block further jobs.
Wic Reset Connect is designed to reset the compatible counter in Epson RX690. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson RX690
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for RX690 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson RX690 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson RX690.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson RX690 is not detected
- Install the original Epson driver for RX690; a generic Windows driver may not expose the required communication interface.
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Connect the printer directly to the computer. Do not use Wi-Fi, a USB hub, docking station or print server.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
Epson RX690 reset FAQ
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Restore Epson RX690
Follow the verified sequence for Epson RX690, then restart the printer and continue your work.