Model-specific reset guide
Epson NX220 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson NX220 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Before resetting Epson NX220
An ink pad message is a maintenance safeguard. It indicates that Epson NX220 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect is designed to reset the compatible counter in Epson NX220. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson NX220
Correct preparation protects the reset key from being used during a failed communication attempt. Verify each requirement before selecting Reset.
-
Install the original driver
Install the official Epson driver for NX220 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson NX220 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson NX220.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson NX220 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Try another USB port and a known data-capable USB cable if the printer is not detected.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
Epson NX220 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
Does the reset clean or replace the ink pads?
No. It changes the stored counter value. Inspect, clean or replace the physical waste ink system when its condition requires it.
Does Epson NX220 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson NX220
Use the model-specific steps above to reset Epson NX220 with a stable connection and a valid key.