Epson NX220 Waste Ink Counter Reset

The Epson NX220 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson NX220 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson NX220 Stops Printing (Waste Counter Limit)

S Wic Reset Connect, you can reset the Epson NX220 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Tipični znakovi

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Step-by-Step: Epson NX220 Waste Counter Reset

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson NX220 via USB (Wi-Fi reset is not supported).
2. Korak 2: Otvoreno Wic Reset Connect with admin privileges and verify device recognition for Epson NX220.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson NX220.

Most Epson NX220 waste counter resets finish in ~1–2 minutes.

Ako se pisač ne detektira

• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Pokrenite aplikaciju kao administrator.

Često postavljana pitanja