Epson XP-631 Waste Ink Counter Reset

When the Epson XP-631 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-631 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-631 Stops Printing (Waste Counter Limit)

Most Epson XP-631 waste ink counter locks are solved by a software counter reset. Wic Reset Connect menyediakan prosedur yang mudah.

Gejala Umum

• ‘Pesan ’Diperlukan Servis' / masa pakai dalam driver atau utilitas
• Kode pemeliharaan/dukungan (bervariasi menurut model/driver)
• Pencetakan berhenti setelah siklus pembersihan
• Peringatan berulang setelah printer dihidupkan ulang

Three Steps to Restore Epson XP-631 Printing

1. Langkah 1: Prepare a Windows PC + USB cable and connect Epson XP-631 directly. Keep Internet enabled for validation.
2. Langkah 2: Jalankan Wic Reset Connect as Administrator and confirm Epson XP-631 is detected.
3. Langkah 3: Use the key to reset the counter, wait for completion, then restart Epson XP-631 to finalize.

Most Epson XP-631 waste counter resets finish in ~1–2 minutes.

Jika Printer Tidak Terdeteksi

• Jalankan aplikasi sebagai Administrator.
• Hidupkan ulang printer dan PC, kemudian coba lagi.
• Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
• Gunakan koneksi USB langsung (hindari hub).
• Nonaktifkan VPN/proxy untuk sementara waktu jika validasi gagal.

Pertanyaan yang Sering Diajukan