Epson XP-631 Waste Ink Counter Reset

When the Epson XP-631 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-631 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson XP-631 Stops Printing (Waste Counter Limit)

Most Epson XP-631 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Uobičajeni simptomi

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Three Steps to Restore Epson XP-631 Printing

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson XP-631 directly. Keep Internet enabled for validation.
2. Korak 2: Trči Wic Reset Connect as Administrator and confirm Epson XP-631 is detected.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson XP-631 to finalize.

Most Epson XP-631 waste counter resets finish in ~1–2 minutes.

Ako se pisač ne detektira

• Pokrenite aplikaciju kao administrator.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.

Često postavljana pitanja