Epson WF-2635 Waste Ink Counter Reset

The Epson WF-2635 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson WF-2635 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why the Epson WF-2635 Stops Printing (Waste Counter Limit)

Most Epson WF-2635 waste ink counter locks are solved by a software counter reset. Wic Reset Connect provides a straightforward procedure.

Reset Epson WF-2635 Waste Ink Counter in 3 Steps

1. 1. lépés: Use a Windows PC (7–11) with Internet access. Connect Epson WF-2635 via USB (Wi-Fi reset is not supported).
2. 2. lépés: Run Wic Reset Connect as Administrator and confirm Epson WF-2635 is detected.
3. 3. lépés: Use the key to reset the counter, wait for completion, then restart Epson WF-2635 to finalize.

Most Epson WF-2635 waste counter resets finish in ~1–2 minutes.

What You Need

• USB connection required (Wi-Fi reset not supported)
• Stable Internet connection during reset
• Windows 7/8/10/11 PC
• Valid Wic Reset Connect reset key

Troubleshooting

• Close Epson Status Monitor or other printer utilities.
• Temporarily disable VPN/proxy if validation fails.
• Use a direct USB connection (avoid hubs).
• Run the app as Administrator.
• Try another USB cable (some cables are charge-only).