Epson ET-1115 Waste Ink Counter Reset

The Epson ET-1115 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson ET-1115 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Why the Epson ET-1115 Stops Printing (Waste Counter Limit)

With Wic Reset Connect, you can reset the Epson ET-1115 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Three Steps to Restore Epson ET-1115 Printing

1. 1. lépés: Prepare a Windows PC + USB cable and connect Epson ET-1115 directly. Keep Internet enabled for validation.
2. 2. lépés: Open Wic Reset Connect with admin privileges and verify device recognition for Epson ET-1115.
3. 3. lépés: Paste the reset key, click Reset, and after completion power-cycle Epson ET-1115.

Most Epson ET-1115 waste counter resets finish in ~1–2 minutes.

System Requirements

• Windows 7/8/10/11 PC
• Stable Internet connection during reset
• Valid Wic Reset Connect reset key
• USB connection required (Wi-Fi reset not supported)

If the Printer Is Not Detected

• Use a direct USB connection (avoid hubs).
• Close Epson Status Monitor or other printer utilities.
• Try another USB cable (some cables are charge-only).
• Run the app as Administrator.
• Restart printer and PC, then try again.