Epson ET-1115 Waste Ink Counter Reset
The Epson ET-1115 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
The Epson ET-1115 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why the Epson ET-1115 Stops Printing (Waste Counter Limit)
Dengan Wic Reset Connect, you can reset the Epson ET-1115 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
Bagaimana Kesalahan Muncul
- Printer menolak untuk mencetak meskipun tinta tersedia
- Monitor Status Epson menunjukkan peringatan pemeliharaan
- Lampu berkedip dan pekerjaan terhalang
- Perangkat terkunci hingga pengaturan ulang dilakukan
Three Steps to Restore Epson ET-1115 Printing
- Langkah 1: Prepare a Windows PC + USB cable and connect Epson ET-1115 directly. Keep Internet enabled for validation.
- Langkah 2: Buka Wic Reset Connect with admin privileges and verify device recognition for Epson ET-1115.
- Langkah 3: Rekatkan tombol atur ulang, klik Atur ulang, and after completion power-cycle Epson ET-1115.
Most Epson ET-1115 waste counter resets finish in ~1–2 minutes.
Persyaratan Sistem
- Windows 7/8/10/11 PC
- Koneksi Internet stabil selama pengaturan ulang
- Tombol reset Wic Reset yang valid Hubungkan tombol reset
- Diperlukan koneksi USB (pengaturan ulang Wi-Fi tidak didukung)
Jika Printer Tidak Terdeteksi
- Gunakan koneksi USB langsung (hindari hub).
- Tutup Epson Status Monitor atau utilitas printer lainnya.
- Coba kabel USB yang lain (beberapa kabel hanya untuk mengisi daya).
- Jalankan aplikasi sebagai Administrator.
- Hidupkan ulang printer dan PC, kemudian coba lagi.
Guide prepared for Epson ET-1115 – Waste Ink Counter Reset using Wic Reset Connect.