Model-specific reset guide
Epson ET-1116 – A hulladékfesték-számláló visszaállítása
The service-required message on Epson ET-1116 often relates to the internal waste ink counter rather than an empty cartridge or paper fault. The steps below help you confirm and resolve that condition.
The counter behind the Epson ET-1116 warning
Waste ink produced by cleaning cycles is collected inside the printer. Epson ET-1116 tracks those cycles electronically and can stop printing when the calculated limit is reached.
Wic Reset Connect is designed to reset the compatible counter in Epson ET-1116. The physical waste ink system should still be inspected and maintained when necessary.
Reset the counter in Epson ET-1116
Complete these steps in order. A direct USB connection and the original Epson driver are essential for reliable communication.
-
Install the original driver
Install the official Epson driver for ET-1116 and confirm that Windows can see the printer.
-
Connect directly by USB
Connect Epson ET-1116 to the computer without Wi-Fi, a hub or an adapter.
-
Start Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson ET-1116.
-
Enter the key and reset
Enter the purchased key, choose Reset and keep the printer connected until completion.
If Epson ET-1116 is not detected
- Clear paused print jobs and restart both the printer and Windows if another program is holding the USB connection.
- Close Epson Status Monitor and any other Epson maintenance software before starting Wic Reset Connect.
- Install the original Epson driver for ET-1116; a generic Windows driver may not expose the required communication interface.
- Run Wic Reset Connect as Administrator and keep the internet connection active throughout validation.
Epson ET-1116 reset FAQ
What if the first reset attempt fails?
Correct the driver or USB communication problem first. If the key was consumed, use the new-key generator or contact support.
How long does the reset take?
The reset itself usually finishes in about 1–2 minutes after the printer has been detected correctly.
Does Epson ET-1116 need service mode?
No. Epson printers do not use the Canon service-mode sequence. Connect the printer normally by USB.
Restore Epson ET-1116
A direct USB connection, the correct driver and a valid key are all you need to reset Epson ET-1116.