Epson ET-1115 Waste Ink Counter Reset
The Epson ET-1115 is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.
The Epson ET-1115 tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.
Why the Epson ET-1115 Stops Printing (Waste Counter Limit)
与 Wic Reset Connect, you can reset the Epson ET-1115 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
错误如何出现
- 打印机即使有墨水也拒绝打印
- 爱普生状态监视器显示维护警告
- 闪烁的灯光和受阻的工作
- 设备被锁定，直到执行重置
Three Steps to Restore Epson ET-1115 Printing
- 步骤 1： Prepare a Windows PC + USB cable and connect Epson ET-1115 directly. Keep Internet enabled for validation.
- 步骤 2： 开放 Wic Reset Connect with admin privileges and verify device recognition for Epson ET-1115.
- 步骤 3： 粘贴重置密钥，点击 重置, and after completion power-cycle Epson ET-1115.
Most Epson ET-1115 waste counter resets finish in ~1–2 minutes.
系统要求
- Windows 7/8/10/11 电脑
- 重置期间稳定的互联网连接
- 有效 Wic 复位连接复位键
- 需要 USB 连接（不支持 Wi-Fi 重置）
如果检测不到打印机
- 使用直接 USB 连接（避免使用集线器）。.
- 关闭 Epson 状态监视器或其他打印机实用程序。.
- 试试另一条 USB 电缆（有些电缆只能充电）。.
- 以管理员身份运行应用程序。.
- 重新启动打印机和电脑，然后再试一次。.
Guide prepared for Epson ET-1115 – Waste Ink Counter Reset using Wic Reset Connect.