Epson SX400 Waste Ink Counter Reset

When the Epson SX400 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson SX400 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson SX400 Show ‘Service Required’?

Most Epson SX400 waste ink counter locks are solved by a software counter reset. Wic Reset Connect pakub lihtsat menetlust.

Tüüpilised märgid

• ‘Service Required’ / service life sõnum draiveris või kommunaalprogrammis
• Hooldus-/tugikood (varieerub mudelite/ajurite kaupa)
• Pärast puhastustsükleid peatub printimine
• Hoiatus kordub pärast printeri taaskäivitamist

Reset Epson SX400 Waste Ink Counter in 3 Steps

1. 1. samm: Prepare a Windows PC + USB cable and connect Epson SX400 directly. Keep Internet enabled for validation.
2. 2. samm: Avatud Wic Reset Connect with admin privileges and verify device recognition for Epson SX400.
3. 3. samm: Use the key to reset the counter, wait for completion, then restart Epson SX400 to finalize.

Most Epson SX400 waste counter resets finish in ~1–2 minutes.