Epson SX400 Waste Ink Counter Reset

When the Epson SX400 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson SX400 uses a software counter to estimate pad saturation and locks printing at a set threshold.

Why Does the Epson SX400 Show ‘Service Required’?

Most Epson SX400 waste ink counter locks are solved by a software counter reset. Wic Reset Connect Pruža jednostavan postupak.

Tipični znakovi

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Reset Epson SX400 Waste Ink Counter in 3 Steps

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson SX400 directly. Keep Internet enabled for validation.
2. Korak 2: Otvoreno Wic Reset Connect with admin privileges and verify device recognition for Epson SX400.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson SX400 to finalize.

Most Epson SX400 waste counter resets finish in ~1–2 minutes.