Epson EP-704A Waste Ink Counter Reset

The Epson EP-704A is a widely used Epson printer. Like many Epson devices, it can stop printing when the internal waste ink counter reaches its predefined limit.

The Epson EP-704A tracks waste ink with an internal counter. Because it is an estimate (not a physical sensor), it may trigger before the pads are actually full.

Understanding the Epson EP-704A Waste Ink Counter

With Wic Reset Connect, you can reset the Epson EP-704A waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

How the Error Appears

• Printer refuses to print even with ink available
• Epson Status Monitor shows maintenance warning
• Blinking lights and blocked jobs
• Device is locked until reset is performed

Three Steps to Restore Epson EP-704A Printing

1. Paso 1: Prepare a Windows PC + USB cable and connect Epson EP-704A directly. Keep Internet enabled for validation.
2. Paso 2: Run Wic Reset Connect as Administrator and confirm Epson EP-704A is detected.
3. Paso 3: Use the key to reset the counter, wait for completion, then restart Epson EP-704A to finalize.

Most Epson EP-704A waste counter resets finish in ~1–2 minutes.

Before You Begin

• Windows 7/8/10/11 PC
• USB connection required (Wi-Fi reset not supported)
• Valid Wic Reset Connect reset key
• Stable Internet connection during reset