Canon MG5600 Ink Absorber Reset Without Service Center

Canon MG5600 Ink Absorber Full Reset

Canon MG5600 can lock printing when the waste ink (ink absorber) counter hits a predefined threshold. This guide explains how to reset it.

Ink absorber pads store waste ink during normal operation. Canon firmware tracks this using a software counter and may stop printing when it reaches the limit.

This page is prepared for Canon MG5600. Service mode instructions are shown only when a matching series procedure is known.

How to Enter Service Mode on Canon MG5600

Some Canon series require entering service mode before the ink absorber counter can be reset.

Turn the printer OFF.
Press and hold Stop/Reset.
While holding Stop/Reset, press and hold Power.
Release Stop/Reset (keep holding Power).
Press Stop/Reset 6 times.
Release Power — the printer should enter service mode.

If it doesn’t work, repeat the sequence carefully. The press count depends on the series.

Reset the Ink Absorber Counter

Completing the reset clears the internal ink absorber counter stored in printer memory and restores normal operation.

Before You Continue

Treat the reset as a maintenance step. If your printer has extremely high usage, consider cleaning/replacing absorber pads to avoid overflow.

Reset tools and instructions

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Use a reliable USB connection and follow the steps in order.

Frequently Asked Questions

How long does it take?

Usually a few minutes once the correct steps are followed.

How many times should I press Stop/Reset?

It depends on the series. Many use 5 presses; PRO/imagePROGRAF/MG use 6 in this generator.

Does every Canon model need service mode?

No. The generator shows service mode steps only when the series procedure is known.

Does reset clean the absorber pads?

No. It resets the counter (software). Pads may still require physical maintenance in high-usage cases.

Guide prepared for Canon MG5600 – Ink Absorber / Waste Ink Counter Reset using Wic Reset Connect.