Epson XP-412 Waste Ink Counter Reset
When the Epson XP-412 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.
During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-412 uses a software counter to estimate pad saturation and locks printing at a set threshold.
What Causes the Epson XP-412 Ink Pad Counter Warning?
مع Wic Reset Connect, you can reset the Epson XP-412 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.
الأعراض الشائعة
- ‘الخدمة مطلوبة’/ رسالة "مدة الخدمة مطلوبة" في برنامج التشغيل أو الأداة المساعدة
- رمز الصيانة/الدعم (يختلف باختلاف الطراز/سائق)
- تتوقف الطباعة بعد دورات التنظيف
- يتكرر التحذير بعد إعادة تشغيل الطابعة
Reset Epson XP-412 Waste Ink Counter in 3 Steps
- الخطوة 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-412 via USB (Wi-Fi reset is not supported).
- الخطوة 2: مفتوح Wic Reset Connect with admin privileges and verify device recognition for Epson XP-412.
- الخطوة 3: الصق مفتاح إعادة الضبط، انقر فوق إعادة تعيين, and after completion power-cycle Epson XP-412.
Most Epson XP-412 waste counter resets finish in ~1–2 minutes.
إذا لم يتم اكتشاف الطابعة
- استخدم اتصال USB مباشر (تجنب المحاور).
- قم بتشغيل التطبيق كمسؤول.
- تعطيل VPN/الوكيل مؤقتاً إذا فشلت عملية التحقق من الصحة.
- أغلق Epson Status Monitor أو الأدوات المساعدة الأخرى للطابعة.
- أعد تشغيل الطابعة والكمبيوتر، ثم حاول مرة أخرى.
الأسئلة الشائعة
هل أحتاج إلى مركز خدمة؟
عادةً لا يكون ذلك في حالة قفل عداد الحبر المهدر؛ وعادةً ما تكون إعادة الضبط كافية.
هل يمكنني إعادة التعيين عبر شبكة Wi-Fi؟
لا، تتطلب إعادة الضبط اتصال USB بجهاز كمبيوتر يعمل بنظام Windows.
ماذا لو لم تنجح إعادة التعيين؟
تحقق من كابل/منفذ USB، وقم بتشغيله كمسؤول، وأغلق أدوات الطابعة الأخرى.
كم من الوقت يستغرق؟
عادةً حوالي 1-2 دقيقة تقريباً.
Guide prepared for Epson XP-412 – Waste Ink Counter Reset using Wic Reset Connect.