Epson XP-412 Waste Ink Counter Reset

When the Epson XP-412 reaches its maintenance threshold, Epson firmware may block printing as a safeguard. In most cases, this is resolved with a counter reset.

During head cleaning and maintenance cycles, excess ink is routed to internal absorber pads. The Epson XP-412 uses a software counter to estimate pad saturation and locks printing at a set threshold.

What Causes the Epson XP-412 Ink Pad Counter Warning?

S Wic Reset Connect, you can reset the Epson XP-412 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Uobičajeni simptomi

• ‘Potreban servis’ / poruka o vijeku trajanja u upravljačkom programu ili korisničkom sučelju
• Kôd za održavanje/podršku (razlikuje se ovisno o modelu/vozaču)
• Tiskanje se zaustavlja nakon ciklusa čišćenja
• Upozorenje se ponavlja nakon ponovnog pokretanja pisača

Reset Epson XP-412 Waste Ink Counter in 3 Steps

1. Korak 1: Use a Windows PC (7–11) with Internet access. Connect Epson XP-412 via USB (Wi-Fi reset is not supported).
2. Korak 2: Otvoreno Wic Reset Connect with admin privileges and verify device recognition for Epson XP-412.
3. Korak 3: Umetnite reset-ključ i kliknite Ponovno pokretanje, and after completion power-cycle Epson XP-412.

Most Epson XP-412 waste counter resets finish in ~1–2 minutes.

Ako se pisač ne detektira

• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Pokrenite aplikaciju kao administrator.
• Privremeno onemogućite VPN/proxy ako provjera ne uspije.
• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.

Često postavljana pitanja