دليل إعادة الضبط الخاص بالطراز

Epson SX215 Reset Waste Ink Counter

When Epson SX215 reports that an ink pad needs service, restarting the printer alone normally does not clear the lock. A compatible reset procedure is required.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

Why the ink pad counter blocks Epson SX215

During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson SX215 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson SX215. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson SX215

ابدأ بعمليات التحقق من الاتصال أدناه، ثم نفّذ إعادة الضبط من دون فتح برامج طابعة أخرى أثناء العملية.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for SX215 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson SX215 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson SX215.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: A successful reset is finalized by switching Epson SX215 off and on. The printer should then accept jobs normally.
If Epson SX215 is not detected
  • Install the original Epson driver for SX215; a generic Windows driver may not expose the required communication interface.
  • أغلق مراقب الحالة Epson وأي برنامج صيانة آخر من Epson قبل بدء Wic Reset Connect.
  • شغّل Wic Reset Connect كمسؤول وحافظ على اتصال الإنترنت نشطًا طوال عملية التحقق.
  • وصّل الطابعة مباشرةً بالكمبيوتر. لا تستخدم Wi-Fi أو موزّع USB أو محطة إرساء أو خادم طباعة.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson SX215 reset FAQ

Can I reset Epson SX215 over Wi-Fi?

لا. يتطلب Wic Reset Connect اتصال USB مباشرًا بالكمبيوتر الذي يعمل بنظام Windows.

ماذا لو فشلت محاولة إعادة الضبط الأولى؟

صحّح مشكلة برنامج التشغيل أو اتصال USB أولًا. إذا تم استهلاك المفتاح، فاستخدم مولّد المفتاح الجديد أو تواصل مع الدعم.

Does Epson SX215 need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

أعد الضبط بثقة

Restore Epson SX215

Complete the Epson SX215 counter reset with Wic Reset Connect and assistance whenever you need it.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك