دليل إعادة الضبط الخاص بالطراز

Epson SX210 Reset Waste Ink Counter

Epson SX210 may refuse new print jobs after estimating that the waste ink pads have reached their service limit. Wic Reset Connect can reset the software counter after the printer is prepared correctly.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

The counter behind the Epson SX210 warning

Every cleaning cycle sends a small amount of ink to the waste ink system. Epson SX210 adds that activity to its counter and displays a maintenance warning when the programmed threshold is reached.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson SX210. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson SX210

أكمل هذه الخطوات بالترتيب. يُعد اتصال USB مباشر وبرنامج التشغيل الأصلي Epson أمرين أساسيين لضمان اتصال موثوق.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for SX210 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson SX210 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson SX210.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: Do not disconnect the cable while the reset is running. Restart Epson SX210 only after Wic Reset Connect reports that the operation is complete.
If Epson SX210 is not detected
  • أغلق مراقب الحالة Epson وأي برنامج صيانة آخر من Epson قبل بدء Wic Reset Connect.
  • Install the original Epson driver for SX210; a generic Windows driver may not expose the required communication interface.
  • امسح مهام الطباعة المتوقفة مؤقتًا وأعد تشغيل الطابعة وWindows إذا كان برنامج آخر يحتفظ باتصال USB.
  • وصّل الطابعة مباشرةً بالكمبيوتر. لا تستخدم Wi-Fi أو موزّع USB أو محطة إرساء أو خادم طباعة.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson SX210 reset FAQ

هل تؤدي إعادة الضبط إلى تنظيف وسادات الحبر أو استبدالها؟

لا. فهي تغيّر قيمة العداد المخزّنة. افحص نظام الحبر المهدَر الفعلي ونظّفه أو استبدله عندما تتطلب حالته ذلك.

كم تستغرق إعادة الضبط؟

تكتمل إعادة الضبط نفسها عادةً خلال نحو 1–2 دقيقة بعد اكتشاف الطابعة بشكل صحيح.

Does Epson SX210 need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

أعد الضبط بثقة

Restore Epson SX210

Complete the Epson SX210 counter reset with Wic Reset Connect and assistance whenever you need it.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك