دليل إعادة الضبط الخاص بالطراز

Epson RX680 Reset Waste Ink Counter

A waste ink counter warning can prevent Epson RX680 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

Why Epson RX680 stops printing

During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson RX680 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson RX680. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson RX680

جهّز الكمبيوتر والاتصال أولًا. تحدث معظم المحاولات غير الناجحة بسبب فقدان برنامج التشغيل الأصلي، أو الاتصال غير المباشر عبر USB، أو استخدام أداة Epson أخرى للطابعة.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for RX680 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson RX680 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson RX680.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: When the success message appears, restart Epson RX680. Allow Windows to detect the printer again before sending a test page.
If Epson RX680 is not detected
  • Install the original Epson driver for RX680; a generic Windows driver may not expose the required communication interface.
  • جرّب منفذ USB آخر وكابل USB معروفًا بقدرته على نقل البيانات إذا لم يتم اكتشاف الطابعة.
  • أغلق مراقب الحالة Epson وأي برنامج صيانة آخر من Epson قبل بدء Wic Reset Connect.
  • شغّل Wic Reset Connect كمسؤول وحافظ على اتصال الإنترنت نشطًا طوال عملية التحقق.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson RX680 reset FAQ

Does Epson RX680 need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

ماذا لو فشلت محاولة إعادة الضبط الأولى؟

صحّح مشكلة برنامج التشغيل أو اتصال USB أولًا. إذا تم استهلاك المفتاح، فاستخدم مولّد المفتاح الجديد أو تواصل مع الدعم.

Can I reset Epson RX680 over Wi-Fi?

لا. يتطلب Wic Reset Connect اتصال USB مباشرًا بالكمبيوتر الذي يعمل بنظام Windows.

أعد الضبط بثقة

Restore Epson RX680

Prepare Epson RX680, purchase a reset key and return to printing without an unnecessary service visit.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك