特定型号重置指南
Epson RX680 Reset Waste Ink Counter
A waste ink counter warning can prevent Epson RX680 from printing even when the printer is otherwise working normally. Follow the checks and reset sequence below to restore operation safely.
Why Epson RX680 stops printing
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson RX680 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect 旨在重置兼容的计数器 Epson RX680. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson RX680
先准备好电脑和连接。大多数尝试失败是由于缺少原始驱动程序、使用了间接 USB 连接，或其他 Epson 实用程序正在使用打印机。.
-
安装原始驱动程序
Install the official Epson driver for RX680 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson RX680 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson RX680.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson RX680 is not detected
- Install the original Epson driver for RX680; a generic Windows driver may not expose the required communication interface.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- 开始前，请关闭 Epson 状态监视器以及任何其他 Epson 维护软件，以便进行 Wic Reset Connect。.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
Epson RX680 reset FAQ
Does Epson RX680 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
如果第一次重置尝试失败怎么办？
请先解决驱动程序或 USB 通信问题。如果密钥已被使用，请使用新密钥生成器或联系支持人员。.
Can I reset Epson RX680 over Wi-Fi?
不能。Wic Reset Connect 需要通过 USB 直接连接到 Windows 计算机。.