دليل إعادة الضبط الخاص بالطراز

Epson NX435 Reset Waste Ink Counter

If your Epson NX435 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

The counter behind the Epson NX435 warning

During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson NX435 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson NX435. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson NX435

تستغرق إعادة الضبط عادةً بضع دقائق فقط، ولكن يجب اكتشاف الطابعة بشكل صحيح قبل استخدام المفتاح.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for NX435 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson NX435 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson NX435.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: After the program confirms completion, close it, turn Epson NX435 off for about 10 seconds and switch it on again. The maintenance lock should be cleared.
If Epson NX435 is not detected
  • Install the original Epson driver for NX435; a generic Windows driver may not expose the required communication interface.
  • شغّل Wic Reset Connect كمسؤول وحافظ على اتصال الإنترنت نشطًا طوال عملية التحقق.
  • امسح مهام الطباعة المتوقفة مؤقتًا وأعد تشغيل الطابعة وWindows إذا كان برنامج آخر يحتفظ باتصال USB.
  • أغلق مراقب الحالة Epson وأي برنامج صيانة آخر من Epson قبل بدء Wic Reset Connect.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson NX435 reset FAQ

Does Epson NX435 need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

ماذا لو فشلت محاولة إعادة الضبط الأولى؟

صحّح مشكلة برنامج التشغيل أو اتصال USB أولًا. إذا تم استهلاك المفتاح، فاستخدم مولّد المفتاح الجديد أو تواصل مع الدعم.

هل تؤدي إعادة الضبط إلى تنظيف وسادات الحبر أو استبدالها؟

لا. فهي تغيّر قيمة العداد المخزّنة. افحص نظام الحبر المهدَر الفعلي ونظّفه أو استبدله عندما تتطلب حالته ذلك.

أعد الضبط بثقة

Restore Epson NX435

Ready to restore Epson NX435? Check the requirements once more and start the guided reset.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك