How to Reset Epson NX435 Waste Ink Counter

Epson NX435 Waste Ink Counter Reset

The Epson NX435 delivers reliable printing, but periodic maintenance routines can increase the waste ink counter and eventually trigger a ‘Service Required’ lock.

A waste ink counter in the Epson NX435 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why the Epson NX435 Stops Printing (Waste Counter Limit)

A service visit is often unnecessary. Wic Reset Connect allows a safe Epson NX435 waste counter reset in minutes.

Typical Signs

‘Service Required’ / service life message in driver or utility
Maintenance/support code (varies by model/driver)
Printing stops after cleaning cycles
Warning repeats after restarting the printer

Epson NX435 Ink Pad Counter Reset – Quick Steps

Step 1: Prepare a Windows PC + USB cable and connect Epson NX435 directly. Keep Internet enabled for validation.
Step 2: Start Wic Reset Connect in Administrator mode and wait until Epson NX435 appears in the device list.
Step 3: Enter your reset key and press Reset. Wait ~1–2 minutes, then restart Epson NX435.

Buy Reset Key ⬇️ Download Wic Reset Connect Instructions

Most Epson NX435 waste counter resets finish in ~1–2 minutes.

Common Fixes

Try another USB cable (some cables are charge-only).
Run the app as Administrator.
Restart printer and PC, then try again.
Close Epson Status Monitor or other printer utilities.
Use a direct USB connection (avoid hubs).

Frequently Asked Questions

What if reset doesn’t work?

Check USB cable/port, run as admin, and close other printer utilities.

Do I need a service center?

Typically not for a waste ink counter lock; a reset is usually sufficient.

Can I reset over Wi-Fi?

No. The reset requires a USB connection to a Windows PC.

How long does it take?

Usually about 1–2 minutes.

Guide prepared for Epson NX435 – Waste Ink Counter Reset using Wic Reset Connect.