Vodnik za ponastavitev za določen model
Epson NX435 Reset Waste Ink Counter
If your Epson NX435 has stopped with an ink pad or service-life warning, the printer may have reached its waste ink counter limit. This model-specific guide explains what the message means and how to complete the reset with Wic Reset Connect.
The counter behind the Epson NX435 warning
During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson NX435 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.
Wic Reset Connect je zasnovan za ponastavitev združljivega števca v Epson NX435. Fizični sistem za odpadno črnilo je treba po potrebi še vedno pregledati in vzdrževati.
Reset the counter in Epson NX435
The reset normally takes only a few minutes, but the printer must be detected correctly before the key is used.
-
Namestite izvirni gonilnik
Install the official Epson driver for NX435 and confirm that Windows can see the printer.
-
Povežite neposredno prek USB-ja
Connect Epson NX435 to the computer without Wi-Fi, a hub or an adapter.
-
Zaženite Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson NX435.
-
Vnesite ključ in ponastavite
Vnesite kupljeni ključ, izberite Ponastavi in pustite tiskalnik povezan do zaključka.
If Epson NX435 is not detected
- Install the original Epson driver for NX435; a generic Windows driver may not expose the required communication interface.
- Zaženite Wic Reset Connect kot skrbnik in med celotnim preverjanjem ohranite aktivno internetno povezavo.
- Počistite zaustavljena tiskalna opravila in znova zaženite tiskalnik ter Windows, če drug program zaseda povezavo USB.
- Pred začetkom zaprite Epson Status Monitor in katero koli drugo vzdrževalno programsko opremo Epson Wic Reset Connect.
Epson NX435 reset FAQ
Does Epson NX435 need service mode?
Ne. Tiskalniki Epson ne uporabljajo zaporedja servisnega načina Canon. Tiskalnik običajno povežite prek USB-ja.
Kaj storiti, če prvi poskus ponastavitve ne uspe?
Najprej odpravite težavo z gonilnikom ali komunikacijo USB. Če je bil ključ porabljen, uporabite generator novega ključa ali se obrnite na podporo.
Ali ponastavitev očisti ali zamenja blazinice za črnilo?
Ne. Spremeni shranjeno vrednost števca. Ko stanje fizičnega sistema za odpadno črnilo to zahteva, ga preglejte, očistite ali zamenjajte.
Restore Epson NX435
Ready to restore Epson NX435? Check the requirements once more and start the guided reset.