دليل إعادة الضبط الخاص بالطراز

Epson DX5000 Reset Waste Ink Counter

Epson DX5000 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

Before resetting Epson DX5000

During head cleaning and normal maintenance, unused ink is directed into internal absorber pads. Epson DX5000 estimates that accumulation with a software counter; it does not directly measure the physical amount of ink in the pads.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson DX5000. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson DX5000

جهّز الكمبيوتر والاتصال أولًا. تحدث معظم المحاولات غير الناجحة بسبب فقدان برنامج التشغيل الأصلي، أو الاتصال غير المباشر عبر USB، أو استخدام أداة Epson أخرى للطابعة.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for DX5000 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson DX5000 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson DX5000.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: After the program confirms completion, close it, turn Epson DX5000 off for about 10 seconds and switch it on again. The maintenance lock should be cleared.
If Epson DX5000 is not detected
  • أغلق مراقب الحالة Epson وأي برنامج صيانة آخر من Epson قبل بدء Wic Reset Connect.
  • Install the original Epson driver for DX5000; a generic Windows driver may not expose the required communication interface.
  • امسح مهام الطباعة المتوقفة مؤقتًا وأعد تشغيل الطابعة وWindows إذا كان برنامج آخر يحتفظ باتصال USB.
  • جرّب منفذ USB آخر وكابل USB معروفًا بقدرته على نقل البيانات إذا لم يتم اكتشاف الطابعة.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson DX5000 reset FAQ

Can I reset Epson DX5000 over Wi-Fi?

لا. يتطلب Wic Reset Connect اتصال USB مباشرًا بالكمبيوتر الذي يعمل بنظام Windows.

Does Epson DX5000 need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

كم تستغرق إعادة الضبط؟

تكتمل إعادة الضبط نفسها عادةً خلال نحو 1–2 دقيقة بعد اكتشاف الطابعة بشكل صحيح.

أعد الضبط بثقة

Restore Epson DX5000

Use the model-specific steps above to reset Epson DX5000 with a stable connection and a valid key.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك