Epson DX5000 Waste Ink Counter Reset

If your Epson DX5000 suddenly refuses to print and shows a maintenance warning, it is often caused by the waste ink (ink pad) counter threshold.

A waste ink counter in the Epson DX5000 accumulates after cleaning operations. Once it reaches a limit, printing is stopped to prevent overflow.

Why Does the Epson DX5000 Show ‘Service Required’?

S Wic Reset Connect, you can reset the Epson DX5000 waste ink counter quickly using a Windows PC, USB connection, and a valid reset key.

Kako se pogreška prikazuje

• Pisač odbija ispisati čak i kad je tinte dovoljno.
• Epson Status Monitor prikazuje upozorenje na održavanje
• Treptajuća svjetla i blokirani poslovi
• Uređaj je zaključan dok se ne izvrši resetiranje.

Reset Epson DX5000 Waste Ink Counter in 3 Steps

1. Korak 1: Prepare a Windows PC + USB cable and connect Epson DX5000 directly. Keep Internet enabled for validation.
2. Korak 2: Otvoreno Wic Reset Connect with admin privileges and verify device recognition for Epson DX5000.
3. Korak 3: Use the key to reset the counter, wait for completion, then restart Epson DX5000 to finalize.

Most Epson DX5000 waste counter resets finish in ~1–2 minutes.

Sistemski zahtjevi

• Windows 7/8/10/11 PC
• Stabilna internetska veza tijekom resetiranja
• Potrebna je USB veza (ne podržava se resetiranje putem Wi-Fi-ja)
• Valjani Wic resetni ključ za povezivanje

Ako se pisač ne detektira

• Zatvorite Epson Status Monitor ili druge uslužne programe za pisač.
• Pokrenite aplikaciju kao administrator.
• Koristite izravno USB-povezivanje (izbjegavajte USB-hubove).
• Ponovno pokrenite pisač i računalo, zatim pokušajte ponovno.
• Isprobajte drugi USB kabel (neki kabeli služe samo za punjenje).

Često postavljana pitanja