特定型号重置指南
Epson WorkForce 325 Reset Waste Ink Counter
Epson WorkForce 325 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.
Why Epson WorkForce 325 stops printing
An ink pad message is a maintenance safeguard. It indicates that Epson WorkForce 325 has reached a stored waste ink value that must be reset before normal printing can resume.
Wic Reset Connect 旨在重置兼容的计数器 Epson WorkForce 325. 。必要时仍应检查并维护实体废墨系统。.
Reset the counter in Epson WorkForce 325
重置通常只需几分钟，但在使用密钥之前，必须正确检测到打印机。.
-
安装原始驱动程序
Install the official Epson driver for WorkForce 325 and confirm that Windows can see the printer.
-
通过 USB 直接连接
Connect Epson WorkForce 325 to the computer without Wi-Fi, a hub or an adapter.
-
启动 Wic Reset Connect
Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WorkForce 325.
-
输入密钥并重置
输入已购买的密钥，选择“重置”，并保持打印机连接状态，直到操作完成。.
If Epson WorkForce 325 is not detected
- 将打印机直接连接到计算机。不要使用 Wi-Fi、USB 集线器、扩展坞或打印服务器。.
- 如果未检测到打印机，请尝试其他 USB 端口和已知支持数据传输的 USB 线缆。.
- Install the original Epson driver for WorkForce 325; a generic Windows driver may not expose the required communication interface.
- 以管理员身份运行 Wic Reset Connect，并在整个验证过程中保持互联网连接处于活动状态。.
Epson WorkForce 325 reset FAQ
重置需要多长时间？
打印机被正确检测到后，重置本身通常会在约 1–2 分钟内完成。.
Does Epson WorkForce 325 need service mode?
不需要。Epson 打印机不使用 Canon 服务模式操作顺序。通过 USB 正常连接打印机即可。.
重置会清洁或更换墨垫吗？
不会。它会更改存储的计数器值。当实体废墨系统的状况需要时，请对其进行检查、清洁或更换。.