دليل إعادة الضبط الخاص بالطراز

Epson WorkForce 325 Reset Waste Ink Counter

Epson WorkForce 325 records cleaning cycles and waste ink usage in an internal counter. When that value reaches its programmed limit, printing can stop until the counter is reset.

مفتاح إعادة الضبط$8,00
التسليم الفوري عبر البريد الإلكترونييشمل الدعم الفني ما يلي:مفتاح بديل بعد فشل إعادة الضبط
المشكلة

Why Epson WorkForce 325 stops printing

An ink pad message is a maintenance safeguard. It indicates that Epson WorkForce 325 has reached a stored waste ink value that must be reset before normal printing can resume.

صُمم Wic Reset Connect لإعادة ضبط العداد المتوافق في Epson WorkForce 325. يجب مع ذلك فحص نظام الحبر المهدور الفعلي وصيانته عند الضرورة.

Windows 7–11كمبيوتر شخصي أو محمول
USB مباشربدون Wi-Fi أو موزّع
الإنترنتللتحقق من المفتاح
مفتاح إعادة الضبطلهذه العملية
خطوة بخطوة

Reset the counter in Epson WorkForce 325

تستغرق إعادة الضبط عادةً بضع دقائق فقط، ولكن يجب اكتشاف الطابعة بشكل صحيح قبل استخدام المفتاح.

  1. ثبّت برنامج التشغيل الأصلي

    Install the official Epson driver for WorkForce 325 and confirm that Windows can see the printer.

  2. الاتصال مباشرةً عبر USB

    Connect Epson WorkForce 325 to the computer without Wi-Fi, a hub or an adapter.

  3. ابدأ تشغيل Wic Reset Connect

    Close Epson Status Monitor, run Wic Reset Connect as Administrator and select Epson WorkForce 325.

  4. أدخل المفتاح وأعد ضبط العداد

    أدخل المفتاح الذي تم شراؤه، واختر Reset، وأبقِ الطابعة متصلة حتى اكتمال العملية.

أكمل بشكل صحيح: When the success message appears, restart Epson WorkForce 325. Allow Windows to detect the printer again before sending a test page.
If Epson WorkForce 325 is not detected
  • وصّل الطابعة مباشرةً بالكمبيوتر. لا تستخدم Wi-Fi أو موزّع USB أو محطة إرساء أو خادم طباعة.
  • جرّب منفذ USB آخر وكابل USB معروفًا بقدرته على نقل البيانات إذا لم يتم اكتشاف الطابعة.
  • Install the original Epson driver for WorkForce 325; a generic Windows driver may not expose the required communication interface.
  • شغّل Wic Reset Connect كمسؤول وحافظ على اتصال الإنترنت نشطًا طوال عملية التحقق.

فتح التعليمات الكاملة

الأسئلة الشائعة

Epson WorkForce 325 reset FAQ

كم تستغرق إعادة الضبط؟

تكتمل إعادة الضبط نفسها عادةً خلال نحو 1–2 دقيقة بعد اكتشاف الطابعة بشكل صحيح.

Does Epson WorkForce 325 need service mode?

لا. لا تستخدم طابعات Epson تسلسل وضع الخدمة Canon. صِل الطابعة بشكل طبيعي عبر USB.

هل تؤدي إعادة الضبط إلى تنظيف وسادات الحبر أو استبدالها؟

لا. فهي تغيّر قيمة العداد المخزّنة. افحص نظام الحبر المهدَر الفعلي ونظّفه أو استبدله عندما تتطلب حالته ذلك.

أعد الضبط بثقة

Restore Epson WorkForce 325

Prepare Epson WorkForce 325, purchase a reset key and return to printing without an unnecessary service visit.

مفتاح إعادة الضبط: $8,00
Shopping Cart
اختر عملتك